<code id="w4eqw"><wbr id="w4eqw"></wbr></code>
<abbr id="w4eqw"></abbr>
  • <noscript id="w4eqw"></noscript>
  • 當前位置:網站首頁產品展示 > > 光纖光纜 > 光纜GYXTW-4b1單模光纖

    產品列表 / products

    相關文章 / article

    光纜GYXTW-4b1單模光纖

    光纜GYXTW-4b1單模光纖

    簡要描述:光纜GYXTW-4b1單模光纖
    ● 中心松套管保護一次涂覆光纖
    ● 光纖集中在纜的中心,加強件分布在光纜護層中的兩側
    ● 鋼帶與纜心之間設有阻水層
    ● 雙面覆塑皺紋鋼帶-聚乙烯粘結外護套
    ● 雙鋼絲平行加強

    產品型號:

    所屬分類:光纖光纜

    更新時間:2015-08-04

    詳細說明:

    品牌TIANKANG/天康集團

    光纜GYXTW-4b1單模光纖

    中心管式輕鎧裝室外光纜(GYXS/GYXTW


    GYXS/GYXTW室外光纜的結構是將250μm光纖套入高模量材料制成的松套管中,松套管內填充防水化合物。松套管外用一層雙面涂塑鋼帶縱包,鋼帶和松套管之間加阻水材料以保證光纜的緊湊和縱向阻水,兩側放置兩根平行鋼絲后擠制聚乙烯護套成纜。

    The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.

    產品特點Characteristics

    l   具有很好的機械性能和溫度特性

    Good mechanical and temperature performance

    l   松套管材料本身具有良好的耐水解性能和較高的強度

    High strength loose tube that is hydrolysis resistant

    l   管內充以特種油膏,對光纖進行了關鍵性保護

    Special tube filling compound ensure a critical protection of fiber

    l   良好的抗壓性和柔軟性

    Crush resistance and flexibility

    l   雙面涂塑鋼帶(PSP)提高光纜的抗透潮能力

    PSP enhancing moisture-proof

    l   兩根平行鋼絲保證光纜的抗拉強度

    Two parallel steel wires ensure tensile strength

    l   直徑小、重量輕、容易敷設

    Small diameter, light weight and friendly installation

    l   較長的交貨長度

    Long delivery length

    產品標準Standards

    長霆光電(上海)GYXS/GYXTW光纜符合YD/T 769-2003標準。

    changting(SH) GYXS/GYXTW cable complies with Standard YD/T 769-2003.


    光學特性Optical Characteristics




    G.652

    G.655

    50/125 μm

    62.5/125 μm








    衰減 Attenuation(+20℃)

    @ 850 nm




    ≤ 3.0 dB/km

    ≤ 3.0 dB/km

    @1300 nm




    ≤ 1.0 dB/km

    ≤ 1.0 dB/km

    @1310 nm


    ≤ 0.36 dB/km

    ≤ 0.40 dB/km



    @1550 nm


    ≤ 0.22 dB/km     

    ≤ 0.23 dB/km     



    帶寬(*) Bandwidth(Class A)

    @ 850 nm




    ≥ 500 MHz·km

    ≥ 200 MHz·km

    @1300 nm




    ≥ 1000 MHz·km

    ≥ 600 MHz·km

    數值孔徑 Numerical Aperture




    0.200 ± 0.015 NA

    0.275 ± 0.015 NA

    光纜截止波長Cable Cut-off Wavelength lcc 


    ≤ 1260 nm

    ≤ 1450 nm




    結構參數 Technical Parameters


    光纜型號

    Cable Type

    (以2纖遞增)

    (Increased by 2 fibers)

    光纖數

    Fiber Count

    光纜重量

    Cable

    Weight

    kg/km

    允許拉伸力

    Tensile Strength

    長期/短期

    Long/Short Term

    N

    允許壓扁力

    Crush Resistance

    長期/短期

    Long/Short Term

    N/100mm

    彎曲半徑

    Bending Radius

    靜態/動態

    Static/Dynamic

    mm

    GYXS/GYXTW-2~12Xn

    2~12

    100

    短期1500N,長期600N或1KM纜重中取大值

    300/1000

    10D/20D





    10D/20D

    GYXS/GYXTW-2~12Xn

    2~12

    124

    1000/3000

    10D/20D

    GYXS/GYXTW-14~24Xn

    14~24

    147

    1000/3000

    10D/20D

    GYXS/GYXTW-26~36Xn

    26~36

    150

    1000/3000

    10D/20D

    GYXS/GYXTW-38~48Xn

    38~48

    207

    1000/3000

    10D/20D

    儲存、使用溫度:-40℃至+70℃

    Storage/Operating Temperature: -40℃ to +70℃

    注Note:

    a.型號的后綴Xn表示選用的光纖類型,詳見光纖型號說明;

    Suffix Xn denotes fiber type and see details  cable illustration.

    b.套管和光纖的顏色排列見色譜表;

    The colour arrangements of fiber and tube are specified in the colour identification table.

    c.加強件外側聚乙烯護套的小厚度小值為0.8mm.

      The nominal value of the PE sheath minimum thickness outside of the strength member is 0.8mm.

    d.12芯以下光纜為鋼帶不扎紋結構;若客戶要求扎紋,需在合同中特別說明。

      The steel tape is not corrugated in the cable with 12 fibers below. If the corrugated steel tape is requested, it should be specified in contract.



    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7